MULTIMET ® ALLOY DISTRIBUTOR IN THE USA
A METAL SOURCE, LLC is a distributor of various MULTIMET ® Alloy in any size or form per specifications as noted below. MULTIMET ® Alloy is commonly used in high stress applications with temperatures up to 1500°F and moderate stresses up to 2,000°F. MULTIMET ® Alloy can be forged, machined and cold-formed by conventional methods and can be welded by various arc and resistance-welding processes. When MULTIMET ® Alloy is solution heat treated, this alloy has about the same resistance as Stainless Steel does to nitric acid. This alloy has been used in a variety of applications such as exhaust manifolds, combustion chambers, turbine blades, tailpipes and tail cones, and nozzles.
Check availability with our sales department by submitting your inquiry below to see if A METAL SOURCE, LLC can provide your MULTIMET ® Alloy metal requirement.
Forms and Shapes Available:
MULTIMET ® Extrusions, N-155, AMS-5769 *
MULTIMET ® Half Oval Bars, N-155, AMS-5769 *
MULTIMET ® Half Round Bars, N-155, AMS-5769 *
MULTIMET ® Hexagonal Bars, N-155, AMS-5769 *
MULTIMET ® Octagonal Bars, N-155, AMS-5769 *
MULTIMET ® Pipes, Seamless, N-155, AMS-5769 *
MULTIMET ® Rectangular Flat Bars, N-155, AMS-5769 *
MULTIMET ® Round Bars, N-155, AMS-5769
MULTIMET ® Sheets, N-155, AMS-5532
MULTIMET ® Square Bars, N-155, AMS-5769 *
MULTIMET ® Threaded Bars / Rods, N-155, AMS-5769 *
MULTIMET ® Tubes, Seamless, N-155, AMS-5769 *
MULTIMET ® Wire, AMS-5794
Approximate Chemical Composition:
Nickel [Ni]: 19.00-21.00
Cobalt [Co]: 18.50-21.00
Manganese [Mn]: 1.00-2.00
Chromium [Cr]: 20.00-22.50
Molybdenum [Mo]: 2.50-3.50
Silicon [Si]: 1.00 max
Carbon [C]: 0.08-0.16
Nitrogen [N]: 0.10-0.20
Tungsten [W]: 2.00-3.00
Iron [Fe]: Balance
Columbium & Tantalum [Cb+Ta]: 0.75-1.25
Physical Constants:
Density: 8.20 g/cm³ or 0.296 lb/in³
Melting Point Range: 2350°F – 2470°F (1288°C – 1354°C)
Properties:
~ Good resistance to corrosion in certain media under both oxidizing and reducing conditions.